Description
Zamp Z-20 Series Prism Helmet Shields
Zamp Z-20 Series Prism Shields are replacement shields for Zamp helmet models. They are available in a variety of colors, including blue, red, gold, and green. The shields are designed to protect the face from wind, rain, and debris. They also include tear off posts and a removable sun-strip at the top of the shield to reduce glare Featuring tear off posts and a removable sun-strip, the Zamp Z-20 Series Prism Shields add an extra layer of protection to your ride. Available in a range of colors, these replacement shields not only shield you from wind, rain, and debris, but also reduce glare for an optimized riding experience..
NOTE: DO NOT USE power tools or overtighten screws when changing shields.
Step 1 - Lay a towel on a flat surface and set the helmet on it.
Step 2 - Remove the shield pivot tensioners on each side. (This is the smaller screw on the sides of the shield.)
Step 3 - Remove the shield pivot screws on each side. (This is the larger screw on the sides of the shield. For best results, we suggest using a quarter to loosen/tighten these screws.)
Step 4 - Remove the shield. We suggest using a soft cloth towel to wipe down the rubber seal as well as where the shield mounts to the helmet for best results.
Step 5 - Place the new shield on the helmet. There are two white washers that go between the shield and helmet, make sure these are in place before re-installing the shield pivot screws.
Step 6 - Hand thread the shield pivot screws to hold the shield in place. Once hand threaded, use a quarter to tighten until snug with the helmet shell. Do not overtighten.
Step 7 - Hand thread the shield pivot tensioners, then tighten to desired tension for shield movement.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.